Certified disinfectant and fumigant with a variety of applications

A Swiss eco-friendly solution for aerial disinfection

is a clear, colorless, odorless, liquid disinfectant that is non-carcinogenic, non-mutagenic, non-toxic and can be used where other chlorine-based disinfectants are ineffective. It is a revolutionary industrial use product that is trusted for use by pharmaceutical manufacturing companies, life science institutes, research labs and hospital operation theatres. The tried and tested patented formulation includes a complex compound that kills all forms of bacteria, viruses and spores, rendering spaces perfectly safe and sterile in 60 minutes.

Features:

• Does not have a foul odor.
• No irritation to the eyes.
• Requires no de-fumigation after treatment.
• Very easy to store and handle.
• No fears of overdosing and no residual effects.
• Thoroughly tested in Western Europe, Australia, the Middle East and India.

Active Constituents:

• Hydrogen Peroxide (10%)
• Silver Nitrate Solution (0.01%)

Applications:

• For use in pharmaceutical manufacturing plants, life science institutes, research labs and hospital operation theatres.
• An ideal choice for users who want to replace Formalin Formaldehyde Fumigation.
• Aerial Fumigation: A concentration of 20% solution is used for fogging with a ULV fogger – i.e. 200 ml of Virosil Pharma in 800 ml of water.
• Virosil Pharma is recommended to be used with a ULV fogger which generates a very fine mist that allows the product to be suspended in the atmosphere for a longer period of time, ensuring elimination of all types of airborne bacteria and viruses.
• It can successfully disinfect Air Handling Units (AHU), ducts, air shafts, humidifiers and filters which harbour loads of bacteria and biofilms.
• A room of 1000 cubic feet can be ready and completely sterile within a maximum period of 60 minutes using a 20% solution of Virosil Pharma.
• Surface/Instrument disinfection: Apply 10% solution of Virosil Pharma on floors, walls, tables and linen. Dip instruments to be sterilized in a 10% solution.
• CIP/Loop System disinfection: Recommended dosages off Virosil Pharma completely eliminates biofilms.
• Resin and Filter disinfection; Dip in a 1% to 3% solution to control foul odor & contamination
• Storage Tank disinfection: Spray the surfaces of the tank with a 5% solution of Virosil Pharma.

Case Study

Virosil Pharma demonstrated efficacy of 3 out of 3 batches against Clostridium difficile (spore form), and therefore, meets the performance requirements set forth by the US EPA when tested at ambient temperature of 22.4°-26.3°C, following a fogging cycle time of 22-24 minutes followed by 143-150 minute room aeration.

Specifications
Colour	Clear as water
pH	Approx. 1.5
Odour	Odourless
Sensitivity	Sensitive to light, to be stored in dark
Foaming characteristics	Does not foam
Coat Formation	No coat
Corrosive Property	At the prescribed concentrations and at a temperature below 50°C, no corrosion should occur