Ideal for industrial shopfloors and greasy surfaces
Surfactants and Allied Chemicals Pvt. Ltd (SAC) offers a range of industrial cleaning & degreasing solutions.
NEW SOLVEX.IFC industrial floor cleaner: This helps remove oil & grease from any surface including epoxy, vinyl & polyurethane flooring.
Dilution: 1:50 to 80 times with water. The dilution ratio can be increased or decreased, depending on the condition of the surface to be cleaned.
DEGREASOL LIQUID oil and grease remover: It is used to remove oil, muck & grease from any surface, including epoxy/ linoleum / PU of industrial shopfloors / other painted surfaces.
Dilution: 1:10 to 20 times (with water) and further, depending on the condition of the surface
DEGREASOL MTL metal surface cleaner: It can be used clean metal surfaces of machines / parts and to remove oil and grease.
Dilution: 1:10 to 20 times (with water) and further, depending on the condition of the surface. Apply with brush; leave for few minutes and wipe off with dry cloth.
GB-14 GREASE BUSTER heavy duty industrial degreaser: This is a suitable solution for removal of industrial dirt from heavily soiled surfaces. Being an alkaline industrial degreaser, it effectively removes synthetic oils, grease, tar, grease and carbon accumulation. Chemical action from GB-14 Grease buster combined with mechanical scrubbing enhances the performance and supports effective soil removal from the surface.
Application: It is suitable for scrubbing with single disc machines & automatic scrubber-driers.
Dilution: For regular scrubbing use 15-20ml in per litre of water and for heavy soil use 30-40ml in per litre of water.
CS-14-CLEAN SCRUB all-purpose floor cleaner: This is a specially formulated Concentrated Cleaner for various types of floor — marble, granite, cemented floor, vitrified tile, epoxy & painted surface. It is effective in removal of soil and stain. It is safe on different types of floors and a cost-effective solution.
Application: Wet Mop with CS-14 on floor, scrub if necessary and rinse off after use. It is suitable for scrubbing with single disc machines & automatic scrubber-driers.
Dilution: For regular mopping /scrubbing of surface with normal soil use 10ml in per litre of water. For heavily soiled surfaces with stubborn dirt use 30ml in per litre of water.
SAC Scrub – Low Foam detergent for machine scrubbing: SAC Scrub – Low Foam combined with mechanical action of scrubber enhances the performance and supports effective cleaning & soil removal from the surface. It is ideally suited for single disc/auto scrubbers. It reduces operating time/cost, protects the vacuum motor(s) from moisture and reduces foam built up in the recovery tank.
Application: It is suitable for scrubbing with single disc machines & automatic scrubber-driers
Dilution: For normal soil use 10ml in per litre of water and for heavy soil use 20ml in per litre of water